Macpac Refuse Bodies have been working to extend the capability of the range of products offered.
This range will assist both new and existing customers deal with the ever changing demands of the industry.
There are a range of key benefits with Macpac refuse bodies, including varying payload options from 4 tonne to 8.5 tonne, waste type dependant. The body is fully enclosed, allowing safe and controlled collection of waste.
The eject procedure is non tipping, meaning less spillages and splashback. The operation of the body is a four ram hydraulic operation resulting in low maintenance.
The body is manufactured using high wear and high corrosion resistant steel, which increases the vehicle service life. All Macpac bodies come with bin weighing and vehicle weighing options.
The Macpac 110 has a capacity of 11m3, the height of the vehicle is 3.3m, with an overall width of 2.3m. The wheel base of the 110 is 3.8m-4.3m. The compaction ratio of this model is 3:1, the compaction cycle is controlled by a hydraulic pressure signal to return solenoid operated hydraulic control. It is also fitted with a low compaction option.
The Macpac range uses our own integrated side loading bin lift. There is also the option to have manual loading apertures, these can be located at the front nearside and offside of the body. The body is fully interlocked on loading doors, bin lifter and tailgate. The lifter is capable of lifting all bins from 80litres to 1280 litres.
The 110 can be mounted on chassis from 10t to 16t. It is designed with maximum safety in mind with operatives working at the side of the vehicle. The load can be ejected from inside the cab. The loading doors cannot be opened while compaction is in operation.